Limited Time Sale [New Unused] Shinano Inc. SI-3310 Spot Sander

Product Features & Basic Specifications

Features: Ideal for removing paint defects and runs after painting.
The orbital motion minimizes uneven rotation due to variations in applied load.

Applications: For removing paint defects on the interior and exterior of automobiles, etc.
For repairing painted surfaces of home appliances, musical instruments, etc.

Notes:
* Operating air pressure: 0.6 MPa
* Please use with 3M Tri-Sact discs (#2000, #3000) or similar, 30mm diameter.
* Please use within a range of 5-7 kg/cm2 air pressure. Using higher pressure may shorten the tool's lifespan or cause malfunction. Using lower pressure will result in insufficient performance, so please be aware.
* To maintain stable performance, please lubricate regularly.
* Insufficient lubrication can cause parts to overheat and wear, leading to operational failure and reduced performance, significantly impacting the tool's lifespan. Please manage lubrication appropriately.
* Air motor section: Before each day's work, lubricate approximately 0.5 cc of air tool specific oil (machine oil, ISO VG8 equivalent) through the air inlet and run the tool idle for about 3-5 seconds to allow the oil to penetrate. Lubrication after use is also recommended.

Accessories:
Air Regulator (181-45)
Air Plug (20PM type)
Mini Oil
Φ30mm Cushion Pad (Soft) (115MB-6S) x 1, Φ30mm Cushion Pad (Hard) (115MB-6H) x 1

Mass (kg): 0.56

No-load Speed (min?1 [rpm]): 10000

Air Consumption (m3/min): 0.2

Sound Level (dB(A)) (50/60Hz): 83

Vibration (m/s2): 10.2a

Orbit Diameter (mm): 3

Sanding Disc Diameter (Φmm): 30