Mask for Finder Screen, Hasselblad V (for 44x33) Set of 2

This is a mask for the viewfinder screen for the Hasselblad V system.
It is for sensor size 44x33.

When using a medium format digital back, the sensor's shooting range is smaller than the original film size. By placing this mask under the screen, you can use it as a guide for the actual shooting range.
It is difficult to obtain genuine manufacturer products, and current models cannot be attached to some bodies, so I made this myself.

Since I found that it can be mass-produced, I am making it by hand in the hope that it will be helpful to those who have the same concerns.

Please note that the material is weak to moisture and oil, so please be careful about contact with such substances. When attaching the mask, hold it by the edges and handle it carefully to avoid fingerprints as much as possible.

The second image and onwards are examples of it being attached.
The intention is to hook it onto the protruding part of the frame on the back of the viewfinder screen, or to cut double-sided tape thinly and attach it to the frame.

As this is a handmade item, please understand that it is non-cancelable and non-returnable, except for critical defects or incorrect sizing.

Representative compatible models include:
- Hasselblad CFV 50C/CFV II 50C/CFV 100C
- Phase One IQ140/150/250/350/P40+/P30+/P21+/P30/P21
- Leaf Credo 40/ Aptus-II 6,8, etc.